The PS200 5 Bay Charger is specifically designed for use with the PS200 Series portable gas detector.
Simply plug it in and charge up to five gas detection units simultaneously.
The 5-way charger accommodates up to five PS200 series instrument(s) with or without protective rubber boot fitted, as illustrated in Fig. 6-2 The charger is connected to mains supply using a universal power supply unit (PSU) supplied with the charger.
The charger can be freestanding, wall or workbench mounted by securing with suitable fixings (not supplied). Before the instrument is located in any of the five charging bays, it is recommended that the instrument is switched OFF, the ʻjumbo clipʼ is in the closed position and the ʻbelt hookʼ is upright.
Key Features:
- Simple to use
- Charge time under 4 hours
- Charging starts automatically upon insertion
- Charges with or without rubber boot fitted
- Clear indication of charging status
- Universal power supply
- Short circuit protection
Install the instrument in one of the vacant charging bays making sure that the locating tongue engages in corresponding slot in the base of the instrument and ensuring that the instrument is firmly seated in charging unit. Charging is fully automated. Instrument(s) can remain installed in the charger after charging is complete.
Hire Code: GDH7384
