Honeywell ToxiRAE Pro Personal Monitor HCHO (Formaldehyde)
Streamline your plant-wide deployment with a family of instruments that offer similar user interface, calibration and maintenance routines, and accessories for easy interoperability for users, and cost savings on training. The ToxiRAE Pro family is the industry’s first and largest family of wireless, personal single-gas monitors that can reliably and accurately monitor a full range of common toxic industrial chemicals (TICs), volatile organic compounds (VOCs), combustible gases, carbon dioxide (CO2), and Oxygen (O2). When combined with ProRAE Guardian software, safety managers can easily view data in real time on all ToxiRAE Pro instruments, anytime, anywhere.
- Easy to maintain and calibrate
- Anytime, anywhere access to real-time instrument reading and alarm status with ProRAE Guardian Software or EchoView Portable Controller
- Five-way alarm notification – man down, and 4 instrument alarms
- Rugged, IP-54 (PID) and IP-65 (EC, LEL, and CO2) protection rating
- 3 months of continuous data logging
- Field-replaceable battery, filter, sensor, and PID fan
- Fully automated calibration with AutoRAE2
Hire Code: GDH5728
| INSTRUMENT SPECIFICATIONS | |
| SIZE | 4.6″ H x 2.4″ W x 1.2″ D (118 x 60 x 30 mm) |
| WEIGHT | 7.76 oz. (220 g) |
| SENSORS | Over 20 intelligent interchangeable field-replaceable electrochemical sensors |
| BATTERY | Rechargeable Li-ion battery- Operating time: > 30 hours (normal operation, non-wireless)- Recharge time: < 4 hours through charging cradle |
| DISPLAY | Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) |
| DISPLAY READOUT | – Real-time reading of gas concentrations in parts per million (ppm) or mg/m3; battery status; data logging on/off; wireless on/off and reception quality- STEL, TWA, and peak values |
| KEYPAD | 2 buttons for operation and programming |
| SAMPLING | Diffusion |
| CALIBRATION | Automatic with AutoRAE 2 Test and Calibration System2 or manual |
| ALARM MODES | – Wireless remote alarm notification; audible (95 dB @ 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions.- Man Down Alarm with pre-alarm and real-time remote wireless notification |
| DATALOGGING | Continuous datalogging with a three-month capacity (at one-minute intervals)- User-configurable datalogging interval (from 1 to 3,600 seconds) |
| COMMUNICATION AND DATA DOWNLOAD | – Data download and instrument set-up on PC via charging and PC comm. cradle- Data download via AutoRAE 2 Automatic Test and Calibration System- Wireless data and status transmission1 via built-in RF modem (optional) |
| WIRELESS NETWORK | ProRAE Guardian Real-Time Wireless Safety System or Closed Loop Network with the EchoView Host |
| SENSOR SPECIFICATIONS | RANGE | RESOLUTION |
| AMMONIA (NH3) | 0 to 100 ppm | 1 ppm |
| CARBON MONOXIDE (CO) CARBON MONOXIDE (CO), EXT. RANGE CARBON MONOXIDE (CO),H2-COMP. | 0 to 500 ppm
0 to 2,000 ppm 0 to 2,000 ppm |
1 ppm
10 ppm 10 ppm |
| CHLORINE (CI2) | 0 to 50 ppm | 0.1 ppm |
| CHLORINE DIOXIDE (CIO2) | 0 to 1 ppm | 0.03 ppm |
| ETHYLENE OXIDE (ETO-A) ETHYLENE OXIDE (ETO-B) ETHYLENE OXIDE (ETO-C), EXT. RANGE | 0 to 100 ppm
0 to 10 ppm 0 to 500 ppm |
1 ppm
0.1 ppm 10 ppm |
| FORMALDEHYDE (HCHO) | 0 to 10 ppm | 0.05 ppm |
| HYDROGEN (H2)
HYDROGEN CHLORIDE (HCL) |
0 to 1,000 ppm
0 to 15 ppm |
10ppm
0.2 ppm |
| HYDROGEN CYANIDE (HCN) | 0 to 50 ppm | 0.5 ppm |
| HYDROGEN SULFIDE (H2S) HYDROGEN SULFIDE (H2S), EXT. RANGE HYDROGEN FLUORIDE (HF) | 0 to 100 ppm
0 to 1,000 ppm 0 to 10 ppm
|
0.1 ppm
1 ppm 0.1 ppm
|
| METHYL MERCAPTAN (CH3-SH) | 0 to 10 ppm | 0.1 ppm |
| NITRIC OXIDE (NO) | 0 to 250 ppm | 0.5 ppm |
| NITROGEN DIOXIDE (NO2) | 0 to 20 ppm | 0.1 ppm |
| OXYGEN (O2) | 0 to 30% Vol. | 0.1% Vol. |
| PHOSPHINE (PH3) | 0 to 20 ppm | 0.1 ppm |
| SULFUR DIOXIDE (SO2) | 0 to 20 ppm | 0.1 ppm |